- Home
- ยป
- Products & Services
- »
- Sika Tile Adhesives
Sika Tile Adhesives
SikaCeram 155-Grey Tile Adhesive
Product Brochure
Model Number | 155 |
Packaging Type | Bag |
Surface Of Application | Tile |
Form | Powder |
Grade Standard | Chemical |
Color | Grey |
Density | 1.31 kg/L |
Shelf Life | 12 Months |
Size | 25 kg |
Brand Name | Sika |
Storage Condition | If stored properly in undamaged original sealed packaging, in dry cooled conditions. |
Product Description
Sikaceram®-155 Is A Cementitious Polymer Modified Tile Adhesive With No Vertical Slip. It Can Create Adhesive Layers Up To 10 Mm Thickness. It Is Suitable For Tile Size Upto 4 Sft On Floor And Wall. Indoor Application Only.
Uses
- For Fixing Tile Size Upto 4 Sft
Characteristics/Advantages
- No Vertical Slip
- Application Upto 10 Mm Thick
Approvals/Standards
One Pack Normal Cement Based No Vertical Slip Adhesive, Suitable For Tile Size Upto 4 Sft. EN12004 Class C1T
Chemical Base
Portland Cement, Selected Aggregates, Water Retention Additives And Re-Dispersible Polymer.
Mixing Ratio
~6.5-7 Litres Of Water (26% - 28%) For 25 Kg Of Sikaceram-155 Grey
Consumption
The Consumption Is Dependent On The Surface Profile And Roughness Of The Substrate As Well As On The Size Of The Tiles And The Application Technique (Double-Spreading, In Thin-Bed Consistency, Or Single Spreading, In Flow-Bed Consistency). As A Guide, In Kilograms Of Powder Per M² : 1.2 Kg / M2 /mm Of Thickness
Ambient Air Temperature
+5°C Min; +35°C Max
Substrate Temperature
+5°C Min; +35°C Max
Substrate Quality / Pre-Treatment
- The Substrate Must Be Cement Laitance Free, Clean And Free From Dirt, Oil, Grease Or Other Contaminants And Loose Or Friable Particles. The Substrate Must Be Perfectly Flat, Sound And Free From Parts Easily Removed, Non-Deformable And Correctly Aged. For Builds Greater Than 10mm Thick, Use The Appropriate Sika Monotop® Or Sika® Level Product(S).
- Sikaceram-155 Is Applied Directly On Plasters And Cementitious Substrates, Cement-Lime Mortars, Concrete, Plasterboard, Floater Finished Concrete.
Mixing
Mix The Contents Of A 25 Kg Bag With The Required Amount Of Water (As Specified Above), Using An Electric Mixer And A Suitable Mixing Spiral At Low Speed, In A Clean Bucket. Do Not Exceed A Mixing Speed Of 500 Rpm As Doing So May Reduce The Final Strength Of The Cured Product. Mix To Obtain A Smooth Paste Free Of Lumps. After Mixing, Leave The Product For 5 Minutes, Then Briefly Stir The Mixture Prior To Application. This Should Result In A Very Creamy, Easily Spreadable, And Highly Thixotropic Adhesive.
Application
- Sikaceram-155 Is Applied Using A Notched Trowel. The Amount Of Product Should Be Enough To Ensure Complete Wetting Of The Tile. Tiling Has To Be Carried Out On Fresh Adhesive, Exerting An Adequate Pressure To Ensure Contact With The Adhesive To Form A Full Bond. If A Surface Film Has Formed On The Adhesive, It Is Necessary To Trowel Over The Previously Applied Adhesive Layer. Avoid Wetting The Adhesive Already Applied With Water.
- To Lay Tiles Sized 900 cm² (E.G. 30 X 30 cm) Or Larger, The Double-Spreading (Buttering) Thin-Bed Consistency Or Single-Spreading Flow-Bed Consistency Techniques Of Adhesive Application Is Always Recommended.
Cleaning Of Tools
- Clean All Tools And Application Equipment With Water Immediately After Use.
- Hardened Material Can Only Be Mechanically Removed.
Further Documents
Sikaceram®-155 Shall Not Be Applied On Metal Surfaces And Wood
Limitations
All Technical Data Stated In This Product Data Sheet Is Based On Laboratory Tests. Actual Measured Data May Vary Due To Circumstances Beyond Our Control. Values Achieved In Laboratory Conditions: 23°C ± 2°C – R.H. 50% ± 5%. Higher Temperatures Reduce The Indicated Lapse Time, Oppositely, Lower Temperatures Increase Them.
SIKA CREAM 288H Gray
Minimum Order Quantity: 1 Kg
Product Brochure
Packaging Size | 25 Kg |
Packaging Type | Bag |
Color | Grey |
Form | Powder |
Grade Standard | Industrial |
Strength | High |
- Laying all kind of ceramic,vitrified tiles,including large gres porcelain.
- Laying Marble & Natural Stone,provided non sensitive to water.
- Suiltable for application where high performance is demanded.
- Cementitious high performance deformable adhesive with no vertical slip and extended open time for thin tiles, large tiles and demanding applications
- high performance is demanded such as a swimmingpool, industrial andheavy traficed floors
Additional Information:
- Item Code: SikaCeram288
- Production Capacity: ~40 min (+27 DegreeC) Open Time > 30 min Thickness 15 mm max.
- Packaging Details: Model Number Ceram 288 Brand Sika Packaging Type Bag Packaging Size 25Kg Portland cement, selected aggregates, water retention additives, re-dispersible polymer
SIKA CREAM 155
Minimum Order Quantity: 1 Bag
Product Brochure
Packaging Size | 20 Kg |
Packaging Type | Bag |
Color | Grey |
Form | Powder |
Grade Standard | Chemical |
Strength | High |
Material Compatibility | Ceramic |
Chemical Resistance | Water |
Style | Compact |
Item Dimensions | 360 x 650 x 100 mm (LxWxH) |
Product Brand | Sika |
SIKA CREAM 212 Gray
Minimum Order Quantity: 1 Bag
Product Brochure
Packaging Type | Bag |
Form | Powder |
Grade Standard | Industrial |
Strength | High |
- Ready To Use Only Water To Be Added.
- Suitable For Fixing Ceramic & Medium Sized Vitrified Tiles on wall &floors.
Additional Information:
- Production Capacity: Ready To Use Only Water To Be Added. Suitable For Fixing Ceramic & Medium Sized Vitrified Tiles on wall &floors.
- Packaging Details: 25Kg
SIKA CREAM 255 gray
Minimum Order Quantity: 1 Bag
Product Brochure
Form of Chemical | Powder |
Brand | Sika |
Packaging Type | Bag |
Packaging Size | 30 Kg |
Color | Grey |
Grade Standard | Chemical |
SikaCeram-50 Tilofix - Tile Adhesive
Minimum Order Quantity: 1 Bag
Product Brochure
Packaging Size | 40 Kg |
Model | SikaCeram 50 Tilofix |
Packaging Type | Bag |
Color | Grey |
Form | Powder |
Grade Standard | Industrial |
Strength | High |
Used as a polymer modified, cementitious, normal setting, self curing, floor and wall tile adhesive. Typically used for small, medium sized ceramic tiles on floor / wall and vitrified tiles upto 4 square feet on floor in residential environments. Suitable for bonding absorbent ceramic and vitrified tiles to absorbent construction material substrates. Indoor use.
Additional Information:
- Item Code: SikaCeram50Tilofix
- Production Capacity: Form Powder Grade Standard Chemical Strength Medium Material Compatibility Ceramic
- Packaging Details: 20 Kg and 40kg Packaging Type Bag Color Grey Surface Of Application cementitious Base Form Powder Grade Standard Chemical Strength Medium Material Compatibility Ceramic Single component ready to use Easy to use, only water to be added Shelf Life 12 months from date of production Is It Eco Friendly Yes Density 1.8 +- 0.2 kg/L Fixture Time ~8 minutes Open Time > 10 minutes Thickness 3 mm min. Chemical Type Portland cement, polymers and selected aggregates
SikaCeram-428 Super Bond T-polyurethane tile adhesive
Minimum Order Quantity: 1 Pack
Product Brochure
Packaging Size | 5 Kg |
Packaging Type | bucket |
Application | Flooring |
Chemical Type | tile adhesive |